Rise to the top with the new Ascend LED Grow Systems®
Our powerful LED extends the standard LED growing spectrum providing energy outside the PAR range to include ultraviolet (UV) and far-red, promoting stronger plant growth with heavier flowers. The LED 350-ES is for growers with limited space who need lower wattage. This three-bar system will cover a 3×4 space with the same spectrum and benefits as the LED 700-ES.
BENEFITS OF UV
Increases resin production
Improves taste and smell
Causes more branching and less stretching
Increases root mass
BENEFITS OF FAR-RED
Increases plant biomass
Enhances flower size
Improves efficiency of overall spectrum
A TRUE FULL SPECTRUM LED GROW LIGHT SYSTEM
16% of Spectral Energy in UV + Far-Red
BEYOND PAR SPECTRUM
Full spectrum including energy in UV and Far Red to enhance plant development and spectrum efficiency
Utilizes wide distribution LEDs to disperse colors uniformly over the coverage area
Robust thermal and electrical design allows LEDs to run cooler and retain 90% of output beyond 36,000 hrs
Rigid frame provides consistent positioning of LED boards for maximum uniformity
Ability to ease plant transition from veg to flower stages
Protects LEDs against dust and water, no optical loss, easy to clean
Manual Dimming Control
The nine-position dial will allow you to set the level you want for the stage of growing you are in.
|Dim Position||Power Level||Input Watts|
|Coverage Area||3 ft. x 4 ft.|
|Height Above Canopy||18 in.|
|Distance between fixtures*||8 in.|
*The distance between fixtures should be measured from the edge of the system
Recommended Fixture Spacing
Technical Specs apply to all voltages. Actual performance may vary.
12 ft. (3.6m) 120V
12 ft. (3.6m) 240V
12 ft. (3.6m) 240V
44.8 in. x 24 in. x 3.9 in.
Suggested Height Above Canopy2
3 ft. x 4 ft.
Distance Between Fixtures3
12 ft. (3.6m) (see Voltage Table for available ends)
Designed to meet UL
5 year limited
Environmental Protection Rating
Designed to meet IP65
Country of Origin
Assembled in USA
1Power consumption varies based on application.
2All output measurements taken from this height.
3The distance between fixtures should be measured from the edge of the system.